The ceramic varnish CERASTAR X has a higher level of hardness and dries very quickly. The coating cures fast and forms glossy, ultra-hard layers. It offers a higher level of resistance than all traditional clearcoats. Industry and construction companies also use it for parts that are heavily worn or often exposed to chemical products (detergents, petrol…). Resistance can be noted to be more than 40% higher than with standard clearcoats.
CERASTAR® ceramic top coat is fully compatible with waterborne or solvent-based automotive paints.
The surface is very easy to clean. It resists better than other HS or UHS clearcoats to minor scratches, mechanical wear, and chemical attacks.
Technical information:
-1-liter kit includes 0.5 L clearcoat + 0.5 L hardener H440.
-Mixing ratio 1:1.
-The curing of the varnish can be extremely rapid, so when painting entire cars, it is recommended not to work at temperatures above 20–25 °C.
-This clearcoat does not adhere directly to metal without primer.
-Can be sanded like conventional clearcoats.
-Note that this clearcoat cannot be polished.
Usage:
-Mixing: 1:1 clearcoat + hardener by weight. No thinner.
-Spray gun: Standard or HVLP 1.2–1.5 mm
-Application: Apply two coats with 10-minute intervals.
-Pot life: 20 minutes at 20 °C
Drying:
Touch dry: 20 min
Ready for assembly: 60 min
Optimal hardness after 48 hours
Saftey Data Sheets:
MSDS_CERASTAR-X_TOPCOAT_ST8900X_04-2024_UK
MSDS_H440_HARDENER_04-2024_UK
Product information:
Comparatif dureté des vernis carrosserie UK TDS UK CERASTAR Clear
TDS UK CERASTAR Clear
Reviews
There are no reviews yet.